Clicky

I am in the process of migrating from 3 2003 WINS servers to two 2008 R2 WINS servers.  WINS1, WINS2, and WINS3 are all 2003 servers that I am planning on decommissioning.  WINS4 and WINS5 are the 2008 R2 replacements.

WINS1(2003) - push\pull replication with WINS 2(2003) and WINS4(2008).
WINS2(2003) - push\pull replication with WINS3(2003)
WINS3(2003) - push\pull replciation with WINS2(2008)
WINS4(2008 - push\pull replication with WINS1(2003) and WINS5(2008)
WINS5(2008) - push\pull replication with WINS4(2008)

I haven't seen any errors in the event logs relating to WINS.  After installing the 2008 WINS servers and configuring the replication I tried to verify the records had were the same accross all 5 WINS servers before I start changing clients.  I discovered that WINS4 didn't hall all the records replicated from WINS1 but it did have all the records from WINS2 and WINS3.  I have tried to force the replication and I get absolutely no messages in the event log.  Any suggestions?  I can't figure out why it only replicates a handful of the records owned by WINS 1 to WINS4.

asked 09/02/2010 02:46

bullfrog264's gravatar image

bullfrog264 ♦♦


15 Answers:
Should be
win1 p/p win2
win1 p/p win4
win2 p/p win1
win2 p/p win3
win3 p/p win2
win4 p/p win1
win4 p/p win5
win5 p/p win4
link
ieden's gravatar image

ieden

Might want to delete owners who do not exist anymore too.
link
ieden's gravatar image

ieden

jeden that is how it is configured replication wise.  It just will not replicate all of the records owned by WINS1 to WINS4.  I cannot delete any owners yet because I have not finished updating clients to point to the new WINS4 and WINS5.  I am not understanding why only some of the WINS records from WINS1 are replicating to WINS4.  Any ideas?
link
bullfrog264's gravatar image

bullfrog264

In the past, what I have done is delete all partners and then all owners. let that sit overnight. The next day create all partners over again and let them fight it out for ownership another night. The third day I went in and deleted old or rogue WINS servers on the network. Hunt down old DC's and uninstall WINS if still present. Can be an adventure, does not require reboot to uninstall WINS so if an old DC is a file server or SQL it will only help improve performance on them. If you still have records that are not replicating, it may be a network setting on one of your routers. Check the Firewall!
link
ieden's gravatar image

ieden

Mine is set up this way:
Win1 p/p Win2
Win2 p/p Win1
Win2 p/p Win3
Win3 p/p Win2
Win3 p/p Win4
Win3 p/p Win5
Win3 p/p Win6
Win3 p/p Win7
Win4 p/p Win3
Win5 p/p Win3
Win6 p/p Win3
Win7 p/p Win3
1-4 in the same office 5,6,7 each in their own remote office. All fat dumb and happy after taking it down to scratch and rebuilding it. 3 is busy but that's because it's the fastest...
link
ieden's gravatar image

ieden

I did modify my topology to be a hub and spoke using WINS3 as the spoke.  It has begun to replicate a few more records but not nearly enough.  I am very confused by this behavior.
link
bullfrog264's gravatar image

bullfrog264

You need to give the topology time to rep. It took me three days from the begining of configuration to the end before I was satisfied. You may also want to check your sites and services to make sure all your subnets are represented.
link
ieden's gravatar image

ieden

Any luck?
link
ieden's gravatar image

ieden

Has your WINS server resumed replications?
link
ieden's gravatar image

ieden

Just because he didn't respond to my requests for an update does not mean the advice given did no solve his issue.
link
ieden's gravatar image

ieden

Hi ieden,

Fair enough, can you indicate which of the responses you think is most appropriate to accept?

Regards,

Chris
Cleanup Volunteer
link
Chris-Dent's gravatar image

Chris-Dent

That's really not for me to say. The owner of the question should have responded. I'm just trying to help people. If the user finally got it working using another method, it would have been nice to see that. Since the resolution is not complete until the user says so, you as a volunteer have the authority to shut the question down and refund the points. We, who answer have no recourse but to try and provide the best answers and hope the asker doesn't bolt. Do what you feel is best, I feel the ID: 33590185 answer would have solved their problem.
link
ieden's gravatar image

ieden

Hey ieden,

I don't close the question really, I leave a recommendation and that is actioned unless someone objects. We don't always get it right as CVs, your chance to interject and provide us with feedback is as important as my original recommendation.

I have no objection to your suggestion, making the recommendation for closing the question into:

Accept: ieden (http:#33590185)

Thanks for coming back to me :)

Chris
Cleanup Volunteer
link
Chris-Dent's gravatar image

Chris-Dent

All,
 
Following an 'Objection' by ieden (at http://www.qa.downappz.com/Q_26672587.html) to the intended closure of this question, it has been reviewed by at least one Moderator and is being closed as recommended by the Expert.
 
At this point I am going to re-start the auto-close procedure.
 
Thank you,
 
_alias99
Community Support Moderator
link
_alias99's gravatar image

_alias99

I apologize for the extremely late response.  It ended up being a corrupted WINS Database.  I had to delete the WINS Database all together.  I do appreciate the assistance but it ended up requiring a call to MS.  Thank you for your help Jeden.
link
bullfrog264's gravatar image

bullfrog264

Your answer
[hide preview]

Follow this question

By Email:

Once you sign in you will be able to subscribe for any updates here

By RSS:

Answers

Answers and Comments

Tags:

×9
×3

Asked: 09/02/2010 02:46

Seen: 249 times

Last updated: 12/21/2010 08:33

Categories